Downloads available:
Application Data Sheet
Equipment Manual
Photo Gallery
Product Literature
Specification Drawings
Virtual 3D Model
(ie browser and vrml plug-in required)
Models available:
CBD-6; CBD-8; CBD-10; CBD-12; CBD-14;
CBD-16; CBD-18; CBD-24; CBD-30; CBD-36
Actuators available:
Pneumatic, electric, hydraulic, and manual hand wheel.
Curved blade diverter valves are designed to direct
and cut off product flow from outlets of storage bins, silos,
conveyors, gravity flow chutes and other discharge points handling
dry bulk materials.
The CBD curved blade diverter valves are fast acting, tight sealing,
and very effective for regulating flow rates. The diverter
configuration will allow not only a selection of flow to one or both
legs at the same time, but will also act as a complete shut off
valve. The curved blade valve should only be used when
handling fine or granular materials and not materials containing a
large percentage of lumps.
The CBD housing is constructed of plate steel with cross member
supports on lager sizes. Each reinforced curved blade pivots
on two flanged bearings allowing it to open and close with ease.
Actuation of curved blade diverter valves can be accomplished in
many ways; pneumatically for fast action, hydraulically for power,
electrically for precise positioning, and manually with a chain
wheel or lever.
The seals on the curved blade diverter are designed to eliminate
product leakage when the blade is in the shut off position.
The seals are mounted to the CBD housing instead of the blade
allowing for easy access and replacement. Blade seals are
selected according to the material being handled and are available
to suit any application.
DCL offers a large selection of curved blade diverter valves from
6 inches [152 mm] square up to 36 inches
[914 mm] square in symmetrical 30 or 45
degree configurations. Curved blade
diverter valves are also available in
sizes larger than 36 inches [914 mm] and
in special configurations including hardened liners.
A choice of construction materials allow handling of all types of
products; fine, granular, lumpy, abrasive, corrosive, and sanitary
applications. A choice of electrical options are also
available allowing for installation in almost any environment; NEMA
4, NEMA 4X, NEMA 7, NEMA 9, 120V/220V control, 460V/415V power, etc. |
Virtual 3D Model
Zoom - Rotate - Spin - Pan
Internet Explorer and VRML plug-in
required. IE
plug-in will automatically install. If you have a
Netscape Navigator, Mozilla, or another
browser click here to install Cortona
VRML Client first. |
