|
| Compact
Filter Module |
Downloads available:
DXF CAD
Drawing Blocks
Equipment Manual
Photo Gallery
Product Literature
Specification Drawings
Models available:
CFM155; CFM195; CFM270; CFM330; CFM470; CFM660
The CFM compact filter module is ideal for use
inline at any bulk material transfer point requiring dust control.
It's low profile configuration also makes the CFM the best choice
for inline filtration when integrated with a DCL loading spout.
The flow tube can be eliminated making this unit suitable as a bin
vent for any tight headroom conditions.
When used as an inline filter, product flows through a central flow
tube while isolated from the upward dust entrained airflow. The
collected dust is deposited back to the material being handled
making the CFM Compact Filter Module an ideal cost effective package
especially when compared to a free standing dust collector utilizing
duct work, discharge air lock, and often a means to convey the dust
back to the system.
The exhaust fan is directly mounted to the assembly eliminating the
need for a remote fan placement. The unique design provides internal
velocities that are lower than what is normally expected from
conventional designs resulting in less load on the filtration media.
The filter elements are automatically cleaned during operation with
a conventional 80 PSI pulse jet system. The unit can be provided
with a final clean feature that is activated at the end of each
loading cycle fully cleaning all elements, eliminating residuals.
Filter media is available to accommodate most applications. Pleated
design, spun bonded media features a smooth surface finish with
exceptional dust cake release. The filter surface is calendared and
compacted to resist penetration by collected particulate. This
results in better cleaning efficiency and faster return to operating
airflow after the cleaning cycle than is possible with traditional
media.
DCL offers a large selection of compact filter modules from
155 to 660 square feet of filter media. Exhaust fans can be
sized up to 5000 CFM.
A choice of construction materials allow handling of all types of
products; fine, granular, lumpy, abrasive, corrosive, and sanitary
applications. A choice of electrical options are also
available allowing for installation in almost any environment; NEMA
4, NEMA 4X, NEMA 7, NEMA 9, 120V/220V control, 460V/415V power, etc. |
 |
|
