|
|
Ventilation Module |
Downloads available:
DXF CAD
Drawing Blocks
Equipment Manual
Photo Gallery
Product Literature
Specification Drawings
Models available:
VMV185; VMV280; VMV375; VMV470; VMV565; VMV660; VMV750; VML85;
VML140; VML185; VML235; VML235; VML280; VML330; VML375
The VMV and VML Ventilation Modules are an excellent choice
for dust control when used directly at the source. This includes
conveyor head chutes, ventilation of enclosed conveyors, screeners,
mixers, silos, and batching bins. The special designed pleated
filter elements are sized to be easily handled and are replaced
without tools.
The dust that is collected by the VMV and VML is deposited back to the
material being handled. The Ventilation Module is an ideal cost
effective package especially when compared to a free standing dust
collector utilizing duct work, discharge air lock, and often a means
to convey the dust back to the system.
The exhaust fan is directly mounted to the assembly eliminating the
need for a remote fan placement. The unique design provides internal
velocities that are lower than what is normally expected from
conventional designs resulting in less load on the filtration media.
The filter elements are automatically cleaned during operation with
a conventional 80-100 PSI pulse jet system. The unit can be provided
with a final clean feature that is activated at the end of each
loading cycle fully cleaning all elements, eliminating residuals.
Filter media is available to accommodate most applications. Pleated
design, spun bonded media features a smooth surface finish with
exceptional dust cake release. The filter surface is calendared and
compacted to resist penetration by collected particulate. This
results in better cleaning efficiency and faster return to operating
airflow after the cleaning cycle than is possible with traditional
media.
DCL offers a large selection of ventilation modules from 85 to
750 square feet of filter media. Exhaust fans can be
sized up to 6000 CFM.
A choice of construction materials allow handling of all types of
products; fine, granular, lumpy, abrasive, corrosive, and sanitary
applications. A choice of electrical options are also
available allowing for installation in almost any environment; NEMA
4, NEMA 4X, NEMA 7, NEMA 9, 120V/220V control, 460V/415V power, etc. |
Model VMV
Model VML |
|
