The CFM compact filter module is ideal for use in-line at any bulk material transfer point requiring dust control. Its low-profile configuration also makes the CFM the best choice for inline filtration when integrated with a DCL loading spout.
When used as an inline filter, product flows through a central flow tube while isolated from the upward dust-entrained airflow. Collected dust is deposited back into the material being handled. This makes the CFM Compact Filter Module an ideal cost-effective package, especially when compared to a free-standing dust collector requiring ductwork, discharge airlock and a separate mechanism to convey dust back to the system.
The CFM’s exhaust fan is directly mounted to the assembly, eliminating the need for a remote fan placement. This unique design provides internal velocities lower than what you’d expect in conventional designs. This gives you less load on your filtration media. The filter elements are automatically cleaned during operation with a conventional 60-80 PSI pulse jet system. The unit can also be provided with a final clean feature. When activated at the end of each loading cycle, it fully cleans all elements, eliminating most residuals.
Filter media is available to accommodate most applications. Pleated design, spun bonded media feature a smooth surface finish with exceptional dust cake release. The filter surface is calendared and compacted to resist penetration by collected particulate. This results in better cleaning efficiency and faster return to operating airflow after the cleaning cycle than traditional media. DCL offers a large selection of compact filter modules from 155 to 660 square feet of filter media. Exhaust fans can be sized up to 5000 CFM.
A choice of construction materials allows you to effectively handle all types of products – fine, granular, lumpy, abrasive and corrosive – and difficult dusty or sanitary applications. You can also choose from the electrical options that are best suited for your environment: NEMA 4, NEMA 4X, NEMA 7, NEMA 9, 120V/220V control, 460V/415V power, etc.
Application: Filters dust from a loading spout and discharges particles back into material flow.
Specifications:Sizes up to 660 sq. ft. of filter media with up to 5,000 CFM air withdrawal.
Share this Product